 |  Brock's smaller diameter polyethylene surge tank helps to conserve manufacturing space. |  Tank Ladder Security Door |  Brock’s smaller 16-P1000 Tank Model features a 53-inch (1.4 m) diameter and a 1,500-lb. (680-kg) capacity. | view all photos |
Versatile Process and Surge Tanks Offer Variety of Uses
Brock’s polyethylene tanks are ideal for a variety of uses requiring a low-cost, low-capacity tank. Brock offers two tank models: a six-foot (1.8-m) diameter, 3,000-pound (1.4-MT) capacity model and a smaller 53-inch (1.4 m) diameter unit with a 1,500-pound (680-kg) capacity.
Both of these process and surge tanks can be used to hold a wide variety of materials, including: - Free-flowing powers
- Plastic pellets
- Some corrosive materials
Brock's surge tanks offer low fill heights so you can easily place them inside your building. Both tanks were designed to accept a variety of boots available for use with many material handling systems, including Brock’s famous FLEX-AUGER® PLUS Delivery System.
Need more storage capacity than offered by these tanks? Check out Brock’s complete line of skirted and unskirted industrial storage silos.
Large tank features include:
- One-piece body. One-piece, rotational-molded 60-degree center draw hopper and tank body are seamless to promote smooth material flow.
- Translucent. High density, ultraviolet-stabilized linear polyethylene tank is translucent to allow users to easily see stored material levels.
- Large fill hole. Brock’s larger tank offers a 22-inch (558.8-mm) diameter fill hole and lid made of galvanized steel for rust-resistance.
- Sturdy roof. Sturdy roof features “high rise” ribs molded into the roof structure to help hold a rooftop load of up to 350 pounds (158.8 kg).
- Strong bottom outlet collar. A 16-inch (406.4-mm) diameter bottom outlet collar is formed from a single piece of galvanized steel for greater strength and rigidity.
- Strong legs. Strong galvanized steel legs give your tank rust-resistance, sturdy support.
- Easy-to-install anchor system. The leg anchor system is designed for greater stability to firmly hold the tank in place while still being simple and efficient to install.
- Optional side ladder. Brock’s optional side ladder is assembled with top quality bolts and is designed wide and sturdy to meet or exceed relevant OSHA standards when installed properly.
- Optional leg extensions. For those uses requiring adjustments in tank height, Brock offers optional leg extensions in increments of a little over 2.5 inches (65.1 mm) up to a maximum extension height of nearly 18 inches (455.6 mm).
- One-year warranty. Brock’s standard one-year warranty is another valuable feature you get. See Brock’s full written warranty for details.
Smaller tank features include:
- One-piece body. One-piece, rotational-molded 70-degree center draw hopper and tank body are seamless to promote smooth material flow.
- Translucent. High density, ultraviolet-stabilized linear polyethylene tank is translucent to allow users to easily see stored material levels.
- Strong bottom outlet collar. A 16-inch (406.4-mm) diameter bottom outlet collar is formed from a single piece of galvanized steel for greater strength and rigidity.
- Strong legs. Strong galvanized steel legs give your tank rust-resistance, sturdy support.
- Easy-to-install anchor system. The leg anchor system is designed for greater stability to firmly hold the tank in place while still being simple and efficient to install.
- One-year warranty. Brock’s standard one-year warranty is another valuable feature you get. See Brock’s full written warranty for details.
|